Greensboro: 336-574-0100, Roanoke: 540-265-2960

Wig and Compression Fittings By Appointment - Call Today to Schedule a Free Consultation!

How to Care for Wigs

HUMAN HAIR CARE & TIPS

We recommend washing your wig every 6-8 wears
JON RENAU DOES NOT RECOMMEND THAT YOU COLOR OR PERM WIGS OR HAIRPIECES

CLEANSE & CONDITION

Before washing your human hair wig, gently remove any tangles with your Jon Renau paddle brush or Jon Renau wide tooth comb
Hold wig or hairpiece under cool running water.
Gently lather the hair with a capful of Argan Smooth Luxury Shampoo while making sure that the hair is traveling in the same direction. DO NOT rub hair as this may cause tangling
Rinse thoroughly in cool water until the water runs clear
Apply Jon Renau Argan Smooth Luxury Conditioner, avoiding the base cap of the wig (applying conditioner to the base of the cap may weaken the knots)
With your fingers, work conditioner through the ends of the hair for about 3-5 minutes
Rinse thoroughly in cold water until the water runs clear

DRY & STYLE

Wrap wig in a towel and gently pat to remove excess water
DO NOT use a brush to detangle your human hair wig while it is wet, gently use your Jon Renau wide tooth comb

Smooth & Sleek
Blend 2-3 pumps of Argan Treatment Mist with Blown Away. Using a round boar-bristle/nylon brush, work through hair in 2” sections starting at nape. Blow dry in downward motion to smooth and direct hair
Volume
Apply 2-3 pumps of Weightless Volumizing Foam throughout hair. Using a round boar-bristle/nylon brush, work through hair in 2” vertical sections starting at nape. Over-direct hair for optimal volume.
Volume & Texture
Liberally spray Boho Beach Mist throughout damp hair. Apply 2-3 pumps of Weightless Volumizing Foam, allow hair to dry naturally or diffuse for added fullness.
TIPS

It is recommended to use professional grade heat styling tools with digital temperature settings to control heat

Your styling tools should be set no higher than 350° F to help maintain the integrity of the hair
Versatile 3-Way Hair Spray works great to help hold your finished style. Adjust the nozzle to “L” for low, “M” for medium hold, or “H” for high hold, depending on your needs.

When curling your human hair, you can use small metal clips to hold each curl while cooling for a tighter, longer-lasting curl. For a looser, more natural looking curl, allow curls to hang while cooling
Boho Beach Mist can be used to on dry hair to add texture and revitalize natural curls

SYNTHETIC CARE & TIPS

We recommend washing your wig every 6-8 wears

CLEANSE & CONDITION

Before washing your wig, gently remove any tangles with your Jon Renau paddle brush or Jon Renau wide tooth comb
Hold wig or hairpiece under cool running water. Gently lather the hair with a capful of Shampoo while making sure that the hair is traveling in the same direction. DO NOT rub hair as this may cause tangling
Rinse thoroughly in cool water until the water runs clear
Wrap wig or hairpiece in a towel and gently pat dry
Gently detangle hair using your Jon Renau wide tooth comb
Spray with Leave-In Conditioning Spray (3-5 pumps) keeping away from base of wig or hairpiece

DRY & STYLE

Allow wig or hairpiece to air dry naturally by placing on a plastic or wire wig stand. DO NOT blow dry
Styling is very easy with your Jon Renau wig or hairpiece. We recommend simply using your fingertips or wig brush/comb for your desired style
If fullness is desired, gently backcomb hair using your wig or hairpiece brush/comb, then smooth the surface hair over and apply Holding Spray
DO NOT use heat to style synthetic fiber (curling irons, flat irons or blow dryers)
TIPS

Be cautious when standing near a heat source (i.e. open oven, heater, etc.) Excessive heat can damage the fiber
We recommend using Jon Renau HD Smooth with your Jon Renau wide tooth comb to detangle your synthetic wig. This is especially important with the mid-length to long length wigs

HD | HEAT DEFIANT CARE & TIPS

We recommend washing your wig every 6-8 wears

CLEANSE & CONDITION

Before washing your HD wig or hairpiece, gently remove any tangles with your Jon Renau wide tooth comb ONLY
Hold wig or hairpiece under cool running water.
Gently lather the hair with a capful of Shampoo while making sure that the hair is traveling in the same direction. DO NOT rub hair as this may cause tangling
Rinse thoroughly in cool water until the water runs clear
Wrap wig or hairpiece in a towel and gently pat dry
Gently detangle hair using your Jon Renau wide tooth comb
Spray with Leave-In Conditioning Spray (3-5 pumps) keeping away from base of wig or hairpiece

CURL

Heat your curling iron to 270°-280° F
Using your Jon Renau wide tooth comb, gently comb hair free of tangles
Starting at the nape, take ½ inch-1.5 inch sections of hair (Smaller sections=tighter curls, larger sections=looser curls)
Spray Heat Treat Thermal Spray on the section to protect the fiber (1-2 pumps per section)
Gather hair into curling iron, smooth through to the ends. Roll iron up towards base of wig or hairpiece, staying 1-2 inches away
Hold for 10-15 seconds, then turn the tip of iron toward the ground and release curl into palm of hand
Holding curl in one hand, gather up towards base and secure curl with a small metal clip (like a pin curl)
Allow curl to cool completely (about 5 minutes); remove clip and let curl hang naturally
Hair can be combed with your Jon Renau wide tooth comb (or fingers for best results) to blend curls

DRY & STYLE

Air drying your wig will give the best results. You can gently blow dry (low-medium heat) using ONLY your Jon Renau wide tooth comb
Apply HD Smooth Detangling Spray, (3-5 pumps) focusing on the bottom half of wig or hairpiece. Gently comb through again with your Jon Renau wide tooth comb
We recommend that ONLY the Jon Renau wide tooth comb is used on your HD wig or hairpiece. Other tools will cause frizzing/tangling
HD Fiber can withstand heat tools up to 350° F, however, Jon Renau recommends working at 270°-280° F
It is recommended to use professional grade heat styling tools with digital temperature settings to control heat

FLAT IRON

Heat your flat iron to 270°-280° F
Starting at the nape, take ½ inch-1.5 inch sections
Spray Heat Treat Thermal Spray on the section to protect the fiber (1-2 pumps per section)
Staying at least 1-2 inches away from base, slowly smooth flat iron down through ends
Keep hair smooth by following behind the flat iron with your Jon Renau wide tooth comb
Allow hair to hang naturally and cool completely

TIPS

We recommend using HD Smooth Detangling Spray with a Jon Renau wide tooth comb DAILY to detangle your HD wig. This is especially important with the mid-length to long length HD wigs or hairpieces
We offer HD Smooth in a convenient 2oz. size for travel
Allow your HD wig to air dry naturally instead of blow drying to help maintain the integrity of the fiber
Help protect the fiber against heat damage by using Heat Treat Thermal Spray when using heat styling tools
There are no products matching the selection.

Schedule a Consultation






With two locations in North Carolina and Virginia to serve you, we provide quality, experience and convenience in a warm and inviting atmosphere. Come see what makes us A Special Place!

A Special Place Wigs
- Greensboro, NC

A Special Place Wigs - Greensboro

A Special Place Wigs - Greensboro
A Special Place Wigs
- Roanoke, VA

A Special Place Wigs - Roanoke

A Special Place Wigs - Roanoke